|
Test
Routing
tests as specified in the relevant specification are carried
out on all the drum length of cable leaving our Works. Type
tests and acceptance tests as specified are also carried out
on random samples as and when necessary.
Every
lot of cable leaving "Avocab" Works under
goes the following test at the final stage of manufacturer.
Type
Test :
- Test
on Conductor
- Anneraling
test (for copper)
- Tensile
Test (Aluminium)
- Wrapping
Test (for Aluminium)
- Conductor
Resistance Test.
- Test
for Armouring Wires/Strips.
- Test
for thickness of Insulation and Sheath.
- Physical
test for Insulation and outer Sheath
- Tensile
Strength & Elongation at break.
- Ageing
in Air oven.
- Shrinkage
test
- Hot
deformation test
- Loss
of Mass in air oven
- Heat
shock test
- Thermal
Stability Test
- Insulation
Resistance Test.
- High
Voltage test (Water Immersion Test)
- High
Voltage test at room temperature.
- Falmmability
test.
| FRLS
Cable |
| 1.
Oxygen Index Test |
: |
ASTM
D 2863 - 77 |
| 2.
Temperature Index Test |
: |
ASTM
D 2863 - 77 |
| 3.
Smoke Density Test |
: |
ASTM
D 2843 - 77 |
| 4.
Halogen Acid gas generation Test |
: |
IEC
- 754 - 1 |
| 5.
Flammability Test |
: |
IEC
- 332 |
| 6.
Swedish Chimney Method |
: |
SS
: 424 - 14 -75 Class - F3 |
Acceptance
Test
- Annealing
test (for copper)
- Tensile
test (Aluminium)
- Wrapping
test (for Aluminium)
- Conductor
Resistance test
- Test
for thickness of Insulation and Sheath
- Tessile
Strength & Elongation at break of Insulation & Sheath.
- Insulation
Resistance.
- High
Voltage test at room temperatire.
Routine
Test
- Conductor
resistance test
- High
Voltage test at room temperature
Packing
: Wooden drums as per BIS Specification.
|
